|
Post by beetleboy on Feb 11, 2015 20:09:00 GMT -8
the empi ones from cip marc! I looked at the race spec hoses and I m going to go that route as well. I have too much to do though and don't think I have time to get it on the road without doing the full conversion. After all the other stuff is done than hopefully I l get the disc stuff done......time though. For real I think that will be next summer.
|
|
|
Post by 1hotvw on Feb 11, 2015 21:50:22 GMT -8
hey frank that style of boot should be clocked at 3 o clock and 9 o clock better flex so they last longer.
|
|
|
Post by beetleboy on Feb 12, 2015 3:56:17 GMT -8
|
|
|
Post by PICTUP on Feb 12, 2015 8:29:21 GMT -8
The owner of Northwest Connecting Rod in the Seattle area, Jerry Koepping, recommended to me these "cheap" non-German boots because he has found they don't leak like the others. In addition to what the manual says(30 degrees off vertical if memory serves), Jerry said to be sure to compress the bellows slightly towards the trans. This allows the boot to work without too much stress each way. Just a thought…. Here is one that I put on my 62 truck after enduring the leaky German ones. Jerry also recommends using Ultra Black silicone on the surfaces where the bolts go. Mine didn't leak at all after this.
|
|
|
Post by beetleboy on Feb 12, 2015 18:43:56 GMT -8
|
|
|
Post by mitchy965 on Feb 12, 2015 18:48:56 GMT -8
"you see sweetie how much better a bug looks with fuchs on it"......to cute frank
|
|
|
Post by Volktales on Feb 12, 2015 19:07:06 GMT -8
Gotta start them young on the polishing!
|
|
|
Post by beetleboy on Feb 16, 2015 19:59:17 GMT -8
|
|
|
Post by mitchy965 on Feb 16, 2015 20:30:23 GMT -8
monitoring pressure drop @oil cooler/getting ready to poke holes in your fingers with braided stainless hose
|
|
|
Post by mitchy965 on Feb 16, 2015 20:31:36 GMT -8
winner winner chicken dinner??
|
|
|
Post by CrazyBrit on Feb 16, 2015 21:23:27 GMT -8
Judging by the Tim's coffee cup lids, I'd say drinking lots of coffee whilst working on your V Dub?!
|
|
|
Post by beetleboy on Feb 16, 2015 21:42:26 GMT -8
FAAAAACK Mitchy correct on all counts!!! I was thinking about putting a pair of leather gloves on whilest I do the braided lines but in fear of getting hassled I just went without....so YEAH....let the bleeding fingers commence! Going to make sure oil pressure stays good after the Oberg and the cooler. Mitchy wins
|
|
|
Post by mitchy965 on Feb 16, 2015 21:55:13 GMT -8
after years of perforating my fingers with the hose i now wrap the hose with gorilla tape as tight as possible before cutting with a chop off saw. saves most red leaks....prize please.
|
|
|
Post by beetleboy on Feb 16, 2015 22:30:40 GMT -8
I ll send it up with camplug next time hes up there!
|
|
|
Post by camplug on Feb 17, 2015 7:04:09 GMT -8
I can't guarantee those Fuch rims will make it to Mitchs shop. (if that is the prize) And I refuse to transport your kid for a day of babysitting!
|
|