|
Post by magikbus on May 24, 2017 19:17:03 GMT -8
Too bad, but it was a good try. Thanks. Stan
Kaddie Shack <jefflain@kaddieshack.com> 4:22 PM (3 hours ago)
to me Thanks for the inquiry. Unfortunately, this one doesn’t fit the bus. I’m not sure what is different about it, but we don’t show one as being available for a bus. You might try Bus Boyz.
Sorry about that!
Jeff Lain The Kaddie Shack 1609 Walnut St Pasadena, CA 91106 714-7-KADRON -- 714-752-3766 KaddieShack.com
|
|
|
Post by magikbus on May 24, 2017 19:46:55 GMT -8
I think I'm going to go with the setup I've got, re: the original picture with all the brass fittings. They'll be all tightened with gas specific thread locker and I'm going to figure out a way to make sure they are all fastened to something solid under the the tank. Maybe one day I'll figure out a way to get a new one as I don't have a welder and I'm not confident enough in my old buzz stick days experience to do that myself. Thanks for all the help.
btw the clutch cable is now in, adjusted and feels like it's doing it's job. That's a big step in the conversion process. Stan
|
|