|
|
Post by hightopRob on Feb 25, 2021 9:15:45 GMT -8
I am looking for a good set of door seals for my fasty, 62-73
Also a drivers side sunvisor clip
|
|
|
|
Post by Volktales on Feb 25, 2021 12:26:46 GMT -8
Nothing usable on the parts car or those parts doors???
|
|
|
|
Post by hightopRob on Feb 25, 2021 13:30:17 GMT -8
No they are all falling apart, dry and crumbly
The sunvisor clip is also on beetles 68-79
|
|
|
|
Post by owdlvr on Feb 26, 2021 15:50:37 GMT -8
I'll try to check the parts cars for good sunvisor clips...
|
|
|
|
Post by hightopRob on Feb 27, 2021 8:55:24 GMT -8
Thanks man! Ive tried to pull a couple off and they just fall apart
|
|
|
|
Post by Volktales on Feb 27, 2021 22:45:44 GMT -8
Those things are cheapo plastic and always rot. You might need to buy new for these...
|
|
|
|
Post by Volktales on Mar 7, 2021 19:43:11 GMT -8
 Rob needs a couple of these linkages for his Fastback. Anybody got some??? |
|
|
|
Post by mitchy965 on Mar 7, 2021 21:04:19 GMT -8
cb sells a decent set for like 20 bucks.
|
|
|
|
Post by hightopRob on Mar 8, 2021 9:51:56 GMT -8
Thanks Mitch
I also found them at AVR but they are 3 weeks to get em. I will look into CB performance also
|
|
|
|
Post by owdlvr on Mar 8, 2021 10:11:59 GMT -8
I have a type-1 dual weber hex bar linkage set that I won't be using, which I'm pretty sure has those ends. The actual threaded rods might be longer, but you could cut those down?
Port Alberni is pretty close...Taylor also won't complain if I suggest a Coombs trip.
|
|
|
|
Post by hightopRob on Mar 15, 2021 7:48:21 GMT -8
Both linkage and visor clips found! I also have door seals coming up from the states, the one's at CIP are 450 so the US was a better option
|
|
