|
Post by stude on Jan 28, 2016 12:11:15 GMT -8
I have some pictures I was going to send to Rustybug61but decided to share Sean has the wrong ignition switch and is going to replace it with the correct one the one he has 4 connections I would think power-acc-on-start the new one has 3 connector power-on-start what he has to do is route the accessory to the switched on power supply of the correct switch. What I have done is power in wire at 3 o'clock has a double spade connector which supplies power in to the switch and power out to my radio for the clock it needs constant power and main wire to fuse box the switch at 6 o'clock is the power on switched supply in the picture I run another double spade connector for my radio and fuel pump main wire goes back to fuse box the wire at 9 o'clock is for starter. This is the double spade connector There are different double spade connectors to accomplish the job.
|
|