|
Post by Wongai on Jun 8, 2017 9:05:43 GMT -8
Hey Stan - I haven't made around to the left hand side of my bus yet, but I actually have both the slip in, and weld in rockers for the right side. I got them from a dude who's project had failed. Both of the parts i have are Klokkerholm from CIP1. Concept one's parts suppliers are better in general, but to be honest, I have had no major issues with (most) of the Klokkerholm parts. Just for fun, I test fitted the slip-in unit and it fit well, but not perfect. I imagine you will need to mess with it a bit to make it work. Being that the sliding door in not involved, the slip in part installed with panel adhesive would likely do the trick. I figure it will be a pain in the a$$ though. :-)
If you happen to be driving by shawnigan lake, feel free to stop in and check it out. If you are not in a hurry, either me or CommodoreCollector will likely be doing another order from Concept 1 in the future. We can get your part included in the shipping.
Are your outer rockers in good shape? B
|
|
|
Post by magikbus on Jun 8, 2017 10:31:06 GMT -8
Nope, outer rockers need replacing also but I figure they are easier to do than the inner. I want to finish the floor, but the inner LH rocker must be done first. I don't think it'd be possible with a finished floor on.
I'll be doing both inner and outer at the same time. STan
|
|
|
Post by Wongai on Jun 8, 2017 12:40:14 GMT -8
Cool - that makes sense. Was trying to get my head around how you were going to only do the inner. Good luck! B
|
|